Introduction This page contains the instructions on how to remove the 99-minute time limit on the NoblePro Elite E8.0. The NoblePro Elite E8.0 is limited to 99 minutes as default from the factory however the limit can be removed by following the instructions below. How to remove the time limit
Introduction This page goes over the NoblePro Elite Series noise level measurement. We know this is important to many people so we have taken the time to record the noise levels at different treadmill speeds. How was it measured The noise was measured at 1 m to the right of
This page contains instructions on how to calibrate the speed for the Elite E8.0. Note: This procedure is for advanced users and to be undertaken at one’s own risk. What will I need? To ensure accurate calibration of the speed you will need a measuring instrument called a tachometer. We
This page contains instructions on how to optimise the motor torque value on the Elite E8.0 and E8i. Before starting this process ensure the belt is correctly adjusted (see guide here). If the torque value is not optimised the belt might stutter, have a sluggish response when in use of
This page explains the rhythmic thumping or sometimes referred to as the “heartbeat” noise a treadmill makes when the running belt is moving. This is a very common question especially for new treadmills or replacement running belts. What causes the sound? The noise is a result of the treadmill running
Need help? Starting your support request online and we’ll connect you to the Support Team.
