We know how difficult it can be to keep up with the latest software and hardware developments, which is why we created the NoblePro HR Bluetooth Modules. This module connect your heart rate chest strap directly to your treadmill.
This means any firmware updates, and new Bluetooth features we publish do not require any new hardware!
The chipset that ships with our Elite treadmills (E8i and E8.0). And, since release v2 (mid-2020) and v3 (2021 onwards), you are able to update your treadmill’s chipset via Bluetooth!
All you need is a quick update via the NoblePro Firmware update app:
How to update the firmware
Firmware is not a normal software update, and it will take a few extra steps. Please be patient, and follow these steps exactly. If you have any questions or issues, please get in touch with us, and we will help you.
Open it up, and tap the button that says “Download latest firmware” to download the latest firmware files to your device.
Turn your treadmill off, and then on again.
This is just to make sure that the chips are not connected to other devices.
Using the Firmware update app, scan for Bluetooth devices and look HR-xxxx – this is the HR chip.
Tap on HR-xxxx in the list to connect to it.
Then, switch tabs, and tap the firmware file called “noblepro-hrm-v2“ to select it.
Tap the “Flash new firmware” button.
This will flash the. HR chip, and could take a few minutes.
Please reboot both:
- Your phone / tablet
- The treadmill
This is very important! ⚠️ firmware is not just a normal software update, and requires a reboot of both devices afterwards.
- All screens purchased after 26th December 2021 have the new modules.
- Open up your screen carefully, and look at the colours of the chips themselves.
→ The v2 chip is red, and the v3 chip is black.