This guide will walk you through how swap over your screen.
If you need further assistance or details on the process, please refer to the relevant user manual.
What will I need:
- Replacement screen
- Star screwdriver
- 5mm allen key
Replacing the screen
Step 1: Remove the 2 screws that fasten the screen cover panel to the back of the screen
Step 2: Remove the 2 screws with flat washers that fasten the console screen to the console base
Step 3: Disconnect the console connections A to A, B to B and C to C respectively

Step 4: Slide the screen out of the console base ensuring none of the wires are bent or twisted
Step 5: Remove the mounting bracket by unfastening the 4 x screws and then feed the screen connection wires (A,B and C) through the hole in the mounting bracket to remove the bracket safely
Step 6: Place the old screen back into the packaging that the new screen was delivered in
Step 7: Attach the mounting bracket onto the back of the new screen and reassemble the screen onto the treadmill console base
Step 8: Reassembly is the reverse of assembly