The NoblePro Go app allows you to connect your Android or iOS device to your treadmill using Bluetooth.
This enables the NoblePro Go app to record your sessions, and provide you detailed insights into your exercise.
Connecting to the treadmill also enables the NoblePro Go app to control the machine, so that you can run Workouts without needing to manually adjust the treadmill’s speed and incline.
To connect to your treadmill, follow these steps:
Step 1: Discover the treadmill
Open the NoblePro Go app, and tap the “Run” tab.
Make sure you enable Bluetooth on your device. If Bluetooth is not available, or your device does not have Bluetooth capability, the app will show you a notice.
On the Run tab, tap the Scan button.
This will attempt to connect to your treadmill (as well as any supported Bluetooth peripherals, like heart-rate monitors), and discover some basic information.
After a few seconds your treadmill should appear on the screen.
The Bluetooth chip’s firmware version details are also displayed below the device’s name.
In the video shown here, the firmware details are as follows:
- Hardware version: NoblePro Connect
- Software version: 3.0.3
Please read our guide on how to update your NoblePro FTMS Bluetooth firmware for more information.
Step 2: Connect to the treadmill
Tap the Connect button on the treadmill’s card.
This will attempt to establish a lasting Bluetooth connection with the treadmill.
If the connection is not made after a few seconds, just try connecting again. It may take a few attempts – especially if you’re in a space with lots of other WiFi or Bluetooth devices.
There are further tips in the app if you’re having trouble connecting.
Once you have connected to the treadmill, the app is ready to record your session. You can now tap the Ready button to continue.