v1.6.2 (2022-04-04)
- Adds support for NoblePro Sidekick
- Adds support for beta groups
v1.5.6 (2022-01-17)
- Fixes a bug where the maintenance message would display erroneously after a session
v1.5.5 (2022-02-11)
- The maintenance screen has received an overhaul, and the treadmill will now notify users when the maintenance distance has been exceeded
- Adds a device identifier to the Advanced settings screen for future use (guide here)
- Fix: Now overrides calibration values properly for treadmills with max-speed set to 22kph
- Fix: Better touch screen responsiveness
- Fix: Calibration value not saving
- Fix: Maintenance – not saving distance
v1.5.1 (2022-01-05)
- Fixes a bug where the treadmill would always use power values for 22kph if the treadmill could go to max-speed of 22kph, instead of using the toggle value
v1.5.0 (2022-01-05)
- Uses the new power values from the treadmill config file if the max-speed has been set to 22kph in Advanced Settings
- Changes 2 strings to give more helpful Toasts while flashing config values
- Adds
max/min
speed and incline values to treadmill status broadcast to be picked up globally
v1.5.0 (2022-01-05)
- Uses the new power values from the treadmill config file if the max-speed has been set to 22kph in Advanced Settings
- Changes 2 strings to give more helpful Toasts while flashing config values
- Adds
max/min
speed and incline values to treadmill status broadcast to be picked up globally - Adds better overrides for the power values for treadmills with the 22kph max-speed override
v1.4.5 (2021-09-02)
- Fixes a number of crashes captured on device logs
v1.4.4 (2021-07-30)
- Added acceleration of the treadmill belt as a parameter
- This requires a MCB firmware update via MegaWin flasher
v1.4.1 (2021-02-21)
- Fixes a bug where the treadmill software wouldn’t be able to update itself after downloading the update script improperly
v1.4.0 (2021-02-15)
- Removes a request header from the software update check, so that the update message dialogue can be displayed